GB
152
This function is for validating the radio link test in installation mode on 1 of the 2 radio bands.
To switch to 2 radio bands, enter:
4.4 Radio link validation in installation mode
0: validation on 1 of the 2 bands (factory)
1: validation on the 2 bands
receiver n°
Commands are only taken into account if a PSTN line or GSM cut message has first been sent by the control panel or dialler.
The receiver is “deactivated” when the PSTN line or GSM connection is restored.
To enable or disable this function, use the control panel keypad to:
4.5 Receiver activation when the PSTN line or GSM connection is cut
0: disabled (factory)
1: enabled
receiver n°
The receiver monitors availability of the radio links. If these are purposefully tampered with, the receiver sends a radio tamper
message triggering the alerts and deterrents.
To modify radio anti-tamper triggering, use the control panel to enter:
4.6 Radio anti-tamper protection
0: disabled (factory)
1: enabled
receiver n°
If there is an attempt to remove the device, the receiver sends a tamper message triggering the alerts and deterrents.
To deactivate the anti-tamper protection against removal, use the control panel keypad to enter:
4.7 Deactivating the anti-tamper protection against removal
0: anti-tamper enabled (factory)
1: anti-tamper disabled
receiver n°
