GB
145
If this configuration is suitable, the operating modes of the different outputs do not need to be programmed. If not, the channel and
operating mode associated with each output are allocated
using the control panel keypad
according to the procedure below:
output n°
(from 1 to 8)
receiver n°
channel value (see table below)
Operating mode
• 1: disabled
• 2: On/Off
• 3: toggle switch
• 4: 1.3 s pulse mode (1)
• 5: 2.5 s pulse mode (2)
• 6: 10 s timer
• 7: 90 s timer
• 8: 3 min timer
• 9: 15 min timer
• 10: 30 min timer
(1) For operating the Daitem gate control system
of an automatic or semi-automatic gate
(opening of one side only).
(2) For operating the Daitem gate control system
of an automatic or semi-automatic gate
(opening of both sides).
Channel Value
Warning 1
Deterrence 2
Prealarm 3
Single or confirmed intrusion (all groups) 4
Single or confirmed intrusion group 1 5
Single or confirmed intrusion group 2 6
Single or confirmed intrusion group 3 7
Single or confirmed intrusion group 4 8
Single or confirmed intrusion group 5 9
Single or confirmed intrusion group 6 10
Single or confirmed intrusion group 7 11
Single or confirmed intrusion group 8 12
Alert 13
Silent alarm 14
Fire alarm 16
GSM or PSTN telephone line anti-tamper 17
“Protection active” indication 18
Light On/Off 19
Channel Value
Light toggle switch 20
Light timer 21
Relay 1 Off/relay 1 On 22
Relay 1 toggle switch 23
Relay 1 timer 24
Relay 2 Off/relay 2 On 25
Relay 2 toggle switch 26
Relay 2 timer 27
Relay 3 Off/relay 3 On 28
Relay 3 toggle switch 29
Relay 3 timer 30
Relay 4 Off/relay 4 On 31
Relay 4 toggle switch 32
Relay 4 timer 33
Disarm/Arm 34
Disarm/Partially arm 1 35
Disarm/Partially arm 2 36
Disarm/Arm group 1 37
Disarm/Arm group 2 38
Channel Value
Disarm/Arm group 3 39
Disarm/Arm group 4 40
Disarm/Arm group 5 41
Disarm/Arm group 6 42
Disarm/Arm group 7 43
Disarm/Arm group 8 44
Disarm/Arm all groups 45
All alarms/”Protection active” indication 46
Technical alarms 47
Individual protection (alert, silent alarm) 48
Self-monitoring (mechanical, radio, GSM
or PSTN line anti-tamper) 49
Power fault 50
Anti-tamper protection
(against cover opening, anti-tamper loop
or power supply cut) 51
Single intrusion (all groups) 52
Confirmed intrusion (all groups) 53