GB
147
Example:
activating a Bandit 240DB dense fog machine.
Continuous alarm system arming (output 1) information and confirmed intrusion (output 4) are required.
The SH710AX receiver is powered via the Bandit system.
1.
Output 1 is factory programmed for Disarming/Total arming. If this is not the case, proceed as follows using the control panel
keypad:
Output used: 1
On/Off
receiver n° 1
Disarm/Arm channel
Then programme output 4 again using the control panel keypad:
Output used: 4
1.3 s
pulse mode
receiver n° 1
Confirmed intrusion channel
(all groups)
