GB
150
SH710AX
A1250A04823
SH710AX
A1250A04823
SH710AX
A1250A04823
SH710AX
A1250A04823
SH710AX
A1250A04823
To start the
procedure, press
and hold the
“test”
button until the LED
goes out.
Press the
“test”
button twice for
output 2.
Press and hold
the
“test”
button
until the LED
goes out.
Press the
“test”
button twice for
On/Off mode.
To end the
procedure, press
and hold the
“test”
button until the LED
goes out.
Press
“OFF”
on the
remote control until the
receiver issues a beep
to confirm.
Press
“ON”
on the
remote control until the
receiver issues a beep
to confirm.
Operation (1)
Press ON
on the remote control
Press OFF
on the remote control
device switched on
device switched off
about
5 s
about 10 s
about 10 s
Specific case:
activating 220 V lighting using a remote control.
Output used: 2
On/Off mode
1.
Proceed as follows:
(1) In this type of application, instead of pressing the alarm ON button to activate lighting, you can instead press a button specifically programmed for Light On,
Relay 1 On, Relay 2 On, etc.
Similarly, instead of pressing the OFF button to deactivate lighting, you can press a button programmed for Light Off, Relay 1 Off, Relay 2 Off, etc.
“beeep”
)
)
)
)
)
“beeep”
)
)
)
)
)
