DAITEM 155-21X, Installation Manual

Page: 17 / 20

GB
"
Summary of your detector’s responses
and indications
normal operation
Detector test (2)
(1) The alarm will sound as long as abnormal heat is detected.
(2) Responses when the test button is pressed for longer than 10 sec and
until the key is released.
Be prepared for a fire
• Plan an evacuation route.
• Prepare an evacuation plan
for every room.
• The least smoke is near the
ground: crawl out of the
house.
• When the alarm sounds,
wake everyone up.
• Prearrange a muster point
outside the house.
• Avoid going into the house
unnecessarily if there is a
fire.
• Call the fire brigade.
During DiY work
the detector must not be
painted. If work is to be
carried out in the room where
the detector is installed,
completely cover the
detector using the plastic
cover provided.
10. User sheet
(pull-out sheet for the user)
Do not forget to remove
the plastic cover when
the work is finished.
Heat detection (1)
All heat detectors
the LED flashes
once every 10 sec.
- -
Red LeD indicating
detector status
White LeD Sounding
Heat detector
transmitting
the heat
detection signal
other hard-wired
interconnected
heat detectors
the LED flashes
quickly
the LED flashes
quickly
the alarm sounds
for 1 sec (75 dB(A)
at 3 m) and then
stops for 1 sec
a safety
halo lights up
every second
a safety
halo lights up
every second
Red LeD indicating
detector status
White LeD Sounding
the alarm sounds
for 1 sec (75 dB(A)
at 3 m) and then
stops for 2 sec
Heat detector
transmitting the heat
detection signal
other hard-wired
interconnected heat
detectors
the LED flashes
quickly
-
a built-in modulated alarm
sounds on a continuous
basis (85 dB(A) at 3m)
a safety
halo lights
up
a safety
halo lights
up
Red LeD indicating
detector status
White LeD Sounding
a built-in modulated alarm
sounds on a discontinuous
basis (85 dB(A) at 3m)