DAITEM 155-21X, Installation Manual

Page: 3 / 20

95
GB
Red LED indicating detector status
Test button
White LED
(safety lighting
when heat is
detected)
Programming
key 0
Lithium
battery
connector
Product
replacement
date Guarantee sticker
In stand-alone mode, the heat detector responds as follows during the heat detection period:
guarantee sticker: remove the pre-cut part of the sticker and stick it to the guarantee
certificate in the user manual supplied with the control panel. If you are adding the siren to
an existing system, use the guarantee sticker provided with this product.
Heat detector
transmitting the heat
detection signal
other hard-wired
interconnected heat
detectors
the LED flashes
quickly
-
a built-in modulated alarm
sounds on a continuous
basis (85 dB(A) at 3m)
a safety
halo lights
up
a safety
halo lights
up
Red LeD indicating
detector status
White LeD Sounding
1.2 Description
a built-in modulated alarm
sounds on a discontinuous
basis (85 dB(A) at 3m)
When connected to a Daitem
alarm system the detector
responds as follows when it
detects heat:
• triggering of the control
panel and security system
wireless sirens in fire
sounding mode for 5 min.,
• triggering of the telephone
dialler.
iMPoRtAnt: the heat detector should be replaced every
ten years.