104
GB
... alerts
When your alarm system is disarmed, the control panel will report the problem with the voice
message
“beep, date, time, fire alarm, detector n° X”
.
... faults
Battery fault on the detector
If the sound indication of the battery fault occurs at an inappropriate time, it is possible to
postpone its occurrence for an 8-hour delay over a maximum 7-day period by pressing the
test button until you hear the 1st beep. This is the time period available for replacing the
Lithium battery.
Battery fault on the control panel
Following a system command, the control panel issues the following voice message:
“beep,
fault, battery, detector n° X”
.
7. Indications...
iMPoRtAnt: in order not to wake you up, audible alarms resulting from power problems
or technical problems are shut down during the night. Any faults are indicated either
after daybreak for a period of more than 10 minutes or 12 hours after their occurrence.
iMPoRtAnt: when a
battery fault occurs, the
detector continues to
function perfectly for
30 days. nevertheless,
it is advisable to replace
the battery as soon as
possible.
Heat detector transmitting
the fault signal
other hard-wired
interconnected heat
detectors
the LED flashes
every 5 sec.
-
2 fast beeps
every 60 sec.
-
-
-
Red LeD indicating
detector status
White LeD
Sounding
Summary of Contents for 155-21X
Page 1: ...Upgraded for e Nova applications...
Page 20: ...2280612004 01 2013...
