37
Perfect Udder® Bag PASTEURIZER/WARMER Owner Manual
revJUNE2016
Remove the rubber
feet by pulling out
with pliers.
Threads are inside the foot.
Threads are partial at first. Use
care to avoid cross threading
during bolt entry.
1/27/16
LEG KIT ASSEMBLY INSTRUCTIONS FOR
Bag PASTEURIZER & Bag WARMER
STEP 3
will be done with the legs standing.
Place the leg
set on a flat
surface and
apply only
enough force to the top
of
the legs so the feet find
their largest footprint.
Check that the top surface
is as level as the floor
surface, then tighten all
hardware.
STEP 4
requires access to the bottom of Unit.
In all fourcorners, install wash-
ers and 3/8 x 1 1/2 hex bolts into
the underside of the feet to
secure the Bag PASTEURIZER or
Bag WARMER to the legs.
