DAINIPPON SCREEN PLATE RITE 4300, User Manual

Page: 73 / 167

5-13
Chapter 5 User Menu
1. Enter the plate thickness and press [ENT] .
2. When entry is complete, press [OK] .
The detection distance setting screen for the plate poor contact sensor appears.
NOTE
Front sensor offset value and displacement sensor offset value is automatically
adjusted, so entry is unnecessary.
2.
Press
[NEXT]
. If the information (manufacturer, model number, and thickness)
in one of the preset media types 31 to 45 is the same as the media you intend to
use, press that number to select it, then press
[OK] .
The selected media type information will be copied to Media Type 1 and you
will return to the negative/positive type selection screen.
NOTE
If the media type information to be used is not preset in one of the types 31
to 45, follow these steps or contact a Dainippon Screen sales office or agent:
• Copy a media type from 31 to 45 that has the same thickness as your media.
• Perform a test exposure and set the optimum focus value.
2.4 Setting the Plate Thickness
Set the plate thickness.
0.24
These keys also move
the highlighted portion.
Plate thickness
Front sensor offset value
Displacement sensor offset value
Fig. 5-10 Plate thickness setting screen
2.5 Setting the Detection Distance for the Plate Poor Contact Sensor
Set the detection distance for the plate displacement sensor.
OK ESC
20
CLR
7 8 9
4 5 6
1 2 3
0
ENT
Distance limit
Fig. 5-11 The detection distance setting screen for the plate poor contact sensor