DAINIPPON SCREEN PLATE RITE 4300, User Manual

Page: 28 / 167

PT-R4300 USERS MANUAL
2-2
1. Installing and Moving the PT-R4300
Installation and moving of the PT-R must be performed by a Dainippon Screen
appointed service comapny or service technician. Dainippon Screen bears absolutely
no responsibility for any damage, breakdowns, or malfunctioning resulting from
installation or moving by anyone other than a Dainippon Screen appointed service
comapny or service technician, and Dainippon Screen extends no guarantees
regarding safety in such a case. If you need to have the PT-R moved or installed,
consult one of the Dainippon Screen offices or agency listed at the end of this
manual.
2. Installation Location
Do not install the PT-R in any of the following locations, as safety problems,
failures, and malfunctioning may result.
• Locations directly exposed to sunlight
• Locations where electrical interference (voltage fluctuations or noise) may
occur
• Locations close to machines that emit strong magnetic fields.
• Locations subject to sudden changes of temperature
• Locations close to sources of heat
• Locations with high temperature or high humidity
• Locations subject to vibration
• Unstable locations where the floor is not level
• Locations with dust
• Location subject to condensation
• Locations where the PT-R might be exposed to chemical solutions, smoke,
volatile gases, or corrosive gases.
High temperature, high humidity Vibrations, unstable
Fig. 2-1 Bad installation locations