DAINIPPON SCREEN PLATE RITE 4300, User Manual

Page: 56 / 167

PT-R4300 USERS MANUAL
4-18
Action when STOP button is pressed
The continue command from the RIP allows
you to continue with the plate that follows the
stopped plate. (The RIP has completed
output of that plate and has begun output of
the next plate.) Please re-execute the
stopped plate. The same is true when an
error occurs.
A continue command in this case is as follows:
• Using the AD-RIP: A canceled job cannot be continued, therefore you must
re-execute the job.
• Using the RENATUS or TaigaSPACE: Select “Continue” in the error dialog.
When ejecting a plate to the online processor
When eject to an online processor is selected, the following online screen will
appear.
Image output from RIP is exposed.
(Display shows "Recording".)
Precautions when the STOP button is pressed to stop the PT-R during
exposure
When eject to the online processor is selected, the connected bridge, online processor,
and stocker must all be in the ready state or the following message will appear during
PT-R initialization.
Ex600 or Ex601 : Either the conveyor, processor, or stocker is
not turned on or is in the busy status or is in error status.
While ejecting a plate to the online processor, a buzzer will beep at one-second
intervals from the beginning of unloading until the completion of output to the
bridge. While the buzzer is beeping, do not open the cover of the bridge or the online
processor, do not attempt external loading, and do not press the external loading start
button. For more details, refer to Chapter 5 “5. Setting the Exposure Conditions” and
Chapter 5 “8. Ejecting the Plates.”
NOTE
For the procedures for using the online processor, refer to the operation manual
for the online processor.
Action after STOP button is pressed
Burn out occurs for blank areas after
exposure.
(Display shows "Burn-out" when
positive plate used.)
Exposure continues from stopped plate
according to command to continue from the
RIP.
Ready
1: Plate 1
OPEN OFFLINE
When eject to the online processor
is selected, this arrow is
displayed.
Fig. 4-26 Online screen