background image

1

3P184443-12N

English

FXZQ07MVJU9

VRV SYSTEM Inverter Air Conditioners

Installation manual

FXZQ09MVJU9
FXZQ12MVJU9
FXZQ15MVJU9
FXZQ18MVJU9

CONTENTS

1. SAFETY CONSIDERATIONS ......................................................................................1
2. BEFORE INSTALLATION ............................................................................................4
3. SELECTING INSTALLATION SITE ..............................................................................6
4. PREPARATIONS BEFORE INSTALLATION ................................................................8
5. INDOOR UNIT INSTALLATION ...................................................................................9
6. REFRIGERANT PIPING WORK ................................................................................11
7. DRAIN PIPING WORK ...............................................................................................13
8. ELECTRIC WIRING WORK .......................................................................................17
9. WIRING EXAMPLE AND HOW TO SET THE REMOTE CONTROLLER ..................18

10. INSTALLATION OF THE DECORATION PANEL .......................................................23
11. FIELD SETTINGS ......................................................................................................24
12. TEST RUN .................................................................................................................25

1. SAFETY CONSIDERATIONS

Read these 

SAFETY CONSIDERATIONS carefully before installing air conditioning equipment. After 

completing the installation, make sure that the unit operates properly during the startup operation.
Instruct the customer on how to operate and maintain the unit. Inform customers that they should store 
this Installation Manual with the Operation Manual for future reference.
Always use a licensed installer or contractor to install this product. Improper installation can result in 

water or refrigerant leakage, electrical shock, fire, or explosion.

Meanings of 

DANGER, WARNING, CAUTION, and NOTE Symbols:

DANGER  . . . . . . . Indicates an imminently hazardous situation which, if not avoided, will result in 

death or serious injury.

WARNING  . . . . . . Indicates a potentially hazardous situation which, if not avoided, could result in 

death or serious injury.

CAUTION . . . . . . . Indicates a potentially hazardous situation which, if not avoided, may result in 

minor or moderate injury. It may also be used to alert against unsafe practices.

NOTE  . . . . . . . . . . Indicates situations that may result in equipment or property-damage accidents 

only.

 DANGER

• 

Refrigerant gas is heavier than air and replaces oxygen. A massive leak can lead to oxygen 

depletion, especially in basements, and an asphyxiation hazard could occur leading to serious 

injury or death.

• 

Do not ground units to water pipes, gas pipes, telephone wires, or lightning rods as incomplete 

grounding can cause a severe shock hazard resulting in severe injury or death. Additionally, 

grounding to gas pipes could cause a gas leak and potential explosion causing severe injury or 

death.

Summary of Contents for VRV FXZQ07MVJU9




























Reviews: