![background image](http://html1.mh-extra.com/html/daikin/super-multi-plus-e-series/super-multi-plus-e-series_service-manual_3601835231.webp)
SiEN18-622
Instruction
System Configuration
219
Notes on flap and louvers angle.
To adjust the vertical blades (louvers)
•
When adjusting the louver, use a robust and
stable stool and watch your steps carefully.
Hold the knob and move the louvers.
(You will find a knob on the left side and the
right side blades.)
•
Unless [SWING] is selected, you should set the flap at a near-
horizontal angle in COOL or DRY mode to obtain the best
performance.
•
In COOL or DRY mode, if the flap is fixed at a downward position, the
flap automatically moves in about 60 minutes to prevent condensation
on it.
ATTENTION
•
Always use a remote control to adjust the flap angle. If you attempt to
move it forcibly with hand when it is swinging, the mechanism may be
broken.
•
Be careful when adjusting the louvers. Inside the air outlet, a fan is
rotating at a high speed.
DRY
COOL
FAN
HEAT
Summary of Contents for Super Multi Plus E-Series
