![background image](http://html1.mh-extra.com/html/daikin/super-multi-plus-e-series/super-multi-plus-e-series_service-manual_3601835229.webp)
SiEN18-622
Instruction
System Configuration
217
•
During Dry mode, so that cold air does not come into direct contact with people, air is blown upper air outlet.
When setting the air outlet selection switch to
•
Regardless of the operating mode or situation, air blows from the upper air outlet.
•
Use this switch when you do not want air coming out of the lower air outlet. (While sleeping etc..)
CAUTION
Air flow selection
•
Make air flow selection according to what suits you.
When setting the air flow selection switch to
•
Air conditioner automatically decides the appropriate blowing pattern depending on the operating
mode/situation.
•
Do not try to adjust the flap by hand.
•
When adjusting by hand, the mechanism may not operate properly or condensation may drip from air outlets.
Operating mode
Situation
Blowing pattern
COOL mode
•
When the room has become fully
cool, or when one hour has passed
since turning on the air conditioner.
•
So that air does not come into direct
contact with people, air is blown
upper air outlet, room temperature is
equilised.
•
At start of operation or other times
when the room is not fully cooled.
•
Air is blown from the upper and
lower air outlets for high speed
cooling during COOL mode, and for
filling the room with warm air during
HEAT mode.
HEAT mode
•
At times other than below.
(Normal time.)
•
At start or when air temperature is
low.
•
So that air does not come into direct
contact with people. Air is blown
upper air outlet.
Summary of Contents for Super Multi Plus E-Series
