5 Operation
Operation manual
8
35A5V1B
R32 Split series
3P717028-1 – 2022.11
5.3.3
Airflow direction
When.
Adjust the airflow direction as desired.
What.
The system directs the airflow differently, depending on the
user selection (swinging or fixed position). It does so by moving
horizontal blades (flaps) or vertical blades (louvers).
Setting
Airflow direction
Vertical automatic
swing
Moves up and down.
Horizontal
automatic swing
Moves from side to side.
+
3-D airflow
direction
Moves alternately up and down and
from side to side
[—]
Stays in a fixed position.
The movable range of the flap varies according to the operation
mode. The flap will stop at the upper position when the airflow rate is
changed to low during the up and down swing setting.
a
b
c
a
Flap range in cooling or drying operation
b
Flap range in heating operation
c
Flap range in fan only operation
CAUTION
▪ ALWAYS use a user interface (e.g. wireless remote
control) to adjust the angle of the flap. When the flap is
swinging and you move it forcibly by hand, the
mechanism will break.
▪ Be careful when adjusting the louvers. Inside the air
outlet, a fan is rotating at high speed.
To adjust the airflow direction
1
To use auto swing, press
or
.
Result:
or
will appear on the LCD.
Result:
The flap (horizontal blade) or the flap (vertical blade)
will begin to swing.
2
To use fixed position, press
or
.when the flap
reaches the desired position.
Result:
or
disappears from the LCD.
5.3.4
Comfort airflow operation
This operation can be used in
heating
or
cooling
operation mode. It
will provide a comfortable wind that will NOT come in direct contact
with people. The system automatically sets the fixed airflow position
upward in Cooling and downward in Heating operation mode.
Cooling operation mode
Heating operation mode
INFORMATION
Powerful and Comfort airflow operation CANNOT be used
at the same time. The last selected function takes priority.
If the vertical automatic swing is selected, Comfort airflow
operation will be cancelled.
To start/stop Comfort airflow operation
1
Press
to start.
Result:
The flap position will change,
is displayed on the
LCD, and the airflow rate is set to automatic.
Mode
Position of flap…
Cooling/Drying
Up
Heating
Down
Note:
Comfort airflow operation is NOT available in Fan only mode.
2
Press
to stop.
Result:
The flap will return to the position from before the Comfort
airflow mode;
disappears from the LCD.
5.3.5
Powerful operation
This operation quickly maximizes the cooling/heating effect in any
operation mode. You can get the maximum capacity.
INFORMATION
Powerful operation CANNOT be used together with Econo
and Comfort airflow operation. The last selected function
takes priority.
Powerful operation will NOT increase the capacity of the
unit if it already operates at maximum capacity.
To start/stop Powerful operation
1
Press
to start.
Result:
is displayed on the LCD. Powerful operation runs
for 20 minutes; after that, operation returns to the previously set
mode.
2
Press
to stop.
Result:
disappears from the LCD.
Note:
Powerful operation can be set only when the unit is running. If
you press
or if you change operation mode, operation will be
cancelled;
disappears from the LCD.
5.3.6
Econo operation
This is a function which enables efficient operation by limiting the
maximum power consumption value. This function is useful for cases
in which attention should be paid to ensure a circuit breaker will not
trip when the product runs alongside other appliances.
