Daikin RY24PEV1K, Service Manual

Page: 59 / 134

SiK401004_A
51 FUNCTION CONTROL
3.4.11 E-heater setting *
E-heater: In heating mode, E-heater is allowed to be turned on for improvement of
efficiency.
If heating mode is turned on by button operation, auxiliary electric heating function will be
automatically turned on.
Press Function button in heating mode into auxiliary electric heating function, E-HEATER
blinking, and press Enter/Cancel button to turn on this function. In this case, E-HEATER
will be displayed, which means E-heater is allowed to be turned on.
If auxiliary electric heating function is on, press Function button to confirm or press
Enter/Cancel button to cancel. In this case, E-HEATER won’t be displayed, which means
E-heater is prohibited to be turned on.
The setting of this function is shown as Fig.3.4.11 below:
Fig.3.4.11 Auxiliary Electric Heating Function Setting
Note: E-heater can not be set in cooling, dry and fan mode, E-heater mark won’t be
displayed. The setting is shown in Fig.3.4.11.
There is not E-heater for A2 and cassette unit.