Wall Mounted and LSP Duct Type Functions
SiSG121917E
47
Part 4 Functions and Control
1.3 Airflow Direction Control
Applicable
Models
CTKS25/35/50/60/71TVMG
CTKB25/35/50/60TVMG
Power-Airflow
(Dual) Flap(s)
The large flap sends a large volume of air downward to the floor and provides an optimum
control in cooling and dry operation.
Cooling/Dry
During cooling or dry operation, the flap retracts into the indoor unit. Then, cool air can be blown
far and distributed all over the room.
Wide-Angle
Louvers
The louvers, made of elastic synthetic resin, provide a wide range of airflow that guarantees
comfortable air distribution.
Auto-Swing
The following table explains the auto-swing process for cooling, dry and fan:
3-D Airflow
Alternative repetition of vertical and horizontal swing motions enables uniform air-conditioning of
the entire room.
When the horizontal swing and vertical swing are both set to automatic operation, the airflow
becomes 3-D airflow. The horizontal and vertical swing motions are alternated and the airflow
direction changes in the order shown in the following diagram.
(1) The vertical blades (louvers) move from the right to the left.
(2) The horizontal blades (flaps) move downward.
(3) The vertical blades (louvers) move from the left to the right.
(4) The horizontal blades (flaps) move upward.
Series
Flap (up and down)
Louver
(right and left)
Cooling / Dry
Fan
25/35/50 class
60/71 class
(R23144)
5°
40°
(R21050)
0°
65°
45°
45°
(R24915)
(R23145)
15°
30°
50°
65°
(R21653)
25°
8
0°
10°
65°
45°
45°
(R11404)
(R13554)
(2)
(4)
(3)
(1)
