Daikin MKS-T Series, Service Manual

Page: 200 / 224

Field Settings SiSG121917E
195 Part 7 Trial Operation and Field Settings
5.2.2 Field Settings with BRC1E63 Wired Remote Controller
Outline
When an optional accessory is installed on the indoor unit, settings of the indoor unit may be
changed. Refer to the installation manual for each optional accessory.
Procedure
1
Press and hold the Cancel button
for 4 seconds or longer.
Service Settings menu is
displayed.
2
3
Highlight the Mode No., and
select desired "Mode No." by
using " " (Down/Up) button.
4
In the case of individual setting
per indoor unit, current settings
are displayed. And, SECOND
CODE NO. " - " means no
function.
5
<Basic screen>
1
Fan
Press and hold Cancel
button for 4 seconds or
longer during backlight lit.
<Service Settings menu screen>
2
Return Setting
Service Settings
Test Operation
Maintenance Contact
Field Settings
Min Setpoints Differential
Group Address
Indoor unit AirNet Address
1/3
Press Menu/Enter button.
<Field settings screen>
In the case of individual
setting per indoor unit
In the case of group
setting
3
4
5
Unit No
0
1–01
5–––
9––– 2–02
6––– 3–01
7–––
Field settings
0–01
4–––
8–––
Return Setting
Mode
20
3
5
Mode
10
Unit No
0
1–
∗
5–––
9–––
2–
∗
6–––
3–
∗
7–––
Field settings
0– 01
4–––
8–––
Return Setting
Press Menu/Enter button.
FIRST CODE NO.
SECOND CODE NO.
Select Field settings in the
Service Settings menu, and
press Menu/Enter button.
Field settings screen is
displayed.
In the case of setting per indoor
unit during group control (When
Mode No. such as
20 , 21 ,
22 , 23 , 25 are selected),
highlight the Unit No. and select
"Indoor unit No." to be set by
using " " (Down/Up) button.
(In the case of group setting, this
operation is not needed.)
Highlight SECOND CODE NO. of
the FIRST CODE NO. to be
changed, and select desired
"SECOND CODE NO." by using
" " (Down/Up) button.
Multiple identical mode number
settings are available.
In the case of group setting, all of
SECOND CODE NO. which may
be set are displayed as "
∗
".
"
∗
" is changed to SECOND
CODE NO. to be set.
And, SECOND CODE NO. " - "
means no function.