background image

7 Maintenance and service

Installation and operation manual

12

FXMA-A

VRV system air conditioner

3P680922-1A – 2022.01

7.2

Cleaning the air filter and air outlet

CAUTION

Turn off the unit before cleaning the air filter and air outlet.

NOTICE

▪ Do  NOT  use  gasoline,  benzene,  thinner  polishing

powder  or  liquid  insecticide. 

Possible  consequence:

Discoloration and deformation.

▪ Do  NOT  use  water  or  air  of  50°C  or  higher. 

Possible

consequence: 

Discoloration and deformation.

7.2.1

To clean the air filter

When to clean the air filter:

▪ Rule  of  thumb:  Clean  every  6  months.  If  the  air  in  the  room  is

extremely contaminated, increase the cleaning frequency.

▪ Depending  on  the  settings,  the  user  interface  can  display  the

"Time  to  clean  filter" 

notification.  Clean  the  air  filter  when  the

notification displays.

▪ If  the  dirt  becomes  impossible  to  clean,  change  the  air  filter

(= optional equipment).

How to clean the air filter:

1

Remove the filter fixing screw.

 In case of installation without

duct on the suction side, remove the filter fixing screw.

2

Remove  the  air  filter.

  Pull  its  cloth  upward  (in  case  of  rear

suction) or backward (in case of bottom suction).

rear suction

1

2

2

bottom suction

1

2

2

3

Clean the air filter.

 Use a vacuum cleaner or wash with water.

If  the  air  filter  is  very  dirty,  use  a  soft  brush  and  neutral
detergent.

4

Dry the air filter in the shadow.

5

Re-attach  the  air  filter.

  Align  the  4  hanger  brackets  and  push

the 4 clips in their place and pull the cloth if necessary.

6

Confirm that all hangers are fixed.

7

Re-install the filter fixing screw.

 In case of installation without

duct on the suction side, re-install the filter fixing screw.

rear suction

2

1

1

bottom suction

2

1

1

8

In case of bottom suction with duct, close the protective guard.
In case of rear suction with duct, close service duct opening.

9

Turn ON the power.

10

To  remove  warning  screens,  see  the  reference  guide  of  the
user interface.

7.2.2

To clean the air outlet

WARNING

Do  NOT  let  the  indoor  unit  get  wet. 

Possible

consequence: 

Electrical shock or fire.

Clean with a soft cloth. If it is difficult to remove stains, use water or
a neutral detergent.

7.3

About the refrigerant

This  product  contains  fluorinated  greenhouse  gases.  Do  NOT  vent
gases into the atmosphere.

Refrigerant type: R32

Global warming potential (GWP) value: 675

NOTICE

Applicable  legislation  on 

fluorinated  greenhouse  gases

requires  that  the  refrigerant  charge  of  the  unit  is  indicated
both in weight and CO

2

 equivalent.

Formula  to  calculate  the  quantity  in  CO

2

  equivalent

tonnes:

  GWP  value  of  the  refrigerant  ×  total  refrigerant

charge [in kg] / 1000

Please contact your installer for more information.

WARNING: MILDLY FLAMMABLE MATERIAL

The refrigerant inside this unit is mildly flammable.

WARNING

The  appliance  shall  be  stored  in  a  room  without
continuously  operating  ignition  sources  (example:  open
flames, an operating gas appliance or an operating electric
heater).

WARNING

▪ Do NOT pierce or burn refrigerant cycle parts.

▪ Do NOT use cleaning materials or means to accelerate

the  defrosting  process  other  than  those  recommended
by the manufacturer.

▪ Be  aware  that  the  refrigerant  inside  the  system  is

odourless.

WARNING

▪ The  refrigerant  inside  the  unit  is  mildly  flammable,  but

normally  does  NOT  leak.  If  the  refrigerant  leaks  in  the
room  and  comes  in  contact  with  fire  from  a  burner,  a
heater,  or  a  cooker,  this  may  result  in  fire,  or  the
formation of a harmful gas.

▪ Turn  OFF  any  combustible  heating  devices,  ventilate

the room, and contact the dealer where you purchased
the unit.

▪ Do  NOT  use  the  unit  until  a  service  person  confirms

that the part from which the refrigerant leaked has been
repaired.

Summary of Contents for FXMA100A5VEB





























Reviews: