![background image](http://html1.mh-extra.com/html/daikin/flx50jv1b/flx50jv1b_user-manual_2459284073.webp)
SiBE04-101
Instruction
System Configuration
65
1.2
FLX50 / 60J
5
O N
OFF
Air purifying filter
Front grille
Air filter
Indicator lamps
Grille tab
Operation
lamp (green)
Air inlet
Air purifying filters are attached to the
inside of the air filters.
•
Push this button once to start operation. Push once again to
stop it.
•
Push the button using an object with a sharp tip, such as a pen.
•
This button is useful when the remote controller is missing.
•
The operation mode refers to the following table.
•
receives signals from the remote controller.
•
When the unit receives a signal, you will
hear a short beep.
Flap (Horizontal blade)
(See page 11 “Adjusting the Air
Flow Direction”.)
TIMER lamp (yellow)
(See page 15 “Timer Operation”.)
HOME LEAVE
lamp (red)
Lights up when you use
HOME LEAVE Operation.
(See page 13.)
The louvre is inside of the air
outlet.
(See page 11 “Adjusting the Air
Flow Direction”.)
Air outlet
Louvre (Vertical blade)
ON/OFF button
Receiver:
FLX
Mode
AUTO
Air flow rate
AUTO
Temperature setting
25˚C
Indoor unit
Opening the front grille
How to open the front grille : (See page 16 “Care and Cleaning”)
Names of Parts
The indoor unit can be installed either to the ceiling or to a wall. The descriptions
contained in this manual show the case when installation is being carried out to the
ceiling. (The methods of operation used are the same when installing to a wall.)
CAUTION
Before opening the front grille, be sure to stop the operation and turn the breaker
OFF.
SiBE04-101.book Page 65 Monday, October 15, 2001 3:08 PM