Daikin FHA70AVEB Installation Manual Download

Page: 3 / 22

English

CONTENTS

AND WIRING EXAMPLE................................................11

10. MOUNTING SUCTION GRILLE · DECORATION

SIDE PANEL.................................................................. 15

11. FIELD SETTING............................................................ 15

12. To perform a test run ..................................................... 16
13. UNIFIED WIRING DIAGRAM LEGEND ........................ 18

The original instructions are written in English.
All other languages are translations of the original instructions.

* Only applicable if this appliance is connected with the
following models of outdoor units: RZAG71~140,
RZASG71~140, RXM35~60, 3MXM40~68, 4MXM68~80,
5MXM90

SAFETY PRECAUTIONS

Carefully read these instructions before installation. Keep this
manual in a handy place for future reference.
Be sure to follow this “SAFETY PRECAUTIONS”.
This product comes under the term “appliances not accessible
to the general public”.

• This manual classifies the precautions into WARNINGS and

CAUTIONS.
Be sure to follow all the precautions below: They are all
important for ensuring safety.

WARNING ....................Indicates a potentially hazard-

ous situation which, if not
avoided, could result in death
or serious injury.

CAUTION .....................Indicates a potentially hazard-

ous situation which, if not
avoided, may result in minor or
moderate injury.
It may also be used to alert
against unsafe practices.

• After the installation is completed, test the air conditioner and

check if the air conditioner operates properly. Give the user
adequate instructions concerning the use and cleaning of the
indoor unit according to the Operation Manual. Ask the user
to keep this manual and the Operation Manual together in a
handy place for future reference.

WARNING

• Ask your local dealer or qualified personnel to carry out

installation work.
Improper installation may result in water leakage, electric
shocks or a fire.

• Perform installation work in accordance with this installation

manual.
Improper installation may result in water leakage, electric
shocks or a fire.Consult your dealer regarding what to do in
case of refrigerant leakage.
When the air conditioner is installed in a small room, it is nec-
essary to take proper measures so that the amount of any
leaked refrigerant does not exceed the concentration limit in
the event of a leakage.
Otherwise, this may lead to an accident due to oxygen defi-
ciency.

• Be sure to use only the specified parts and accessories for

installation work.
Failure to use the specified parts may result in the air condi-
tioner falling down, water leakage, electric shocks, a fire, etc.

• Install the air conditioner on a foundation that can withstand

its mass.
Insufficient strength may result in the air conditioner falling
down and causing injury.
In addition, it may lead to vibration of indoor units and cause
unpleasant chattering noise.

• Carry out the specified installation work in consideration of

strong winds, typhoons, or earthquakes.
Improper installation may result in an accident such as air
conditioner falling.

• Make certain that all electrical work is carried out by qualified

personnel according to the applicable legislation (note 1) and
this installation manual, using a separate circuit.
In addition, even if the wiring is short, make sure to use a wir-
ing that has sufficient length and never connect additional
wiring to make the length sufficient.
Insufficient capacity of the power supply circuit or improper
electrical construction may lead to electric shocks or a fire.
(note 1) applicable legislation means “All international,

national and local directives, laws, regulations and/
or codes which are relevant and applicable for a
certain product or domain”.

• Earth the air conditioner.

Do not connect the earth wiring to gas or water piping, light-
ning conductor or telephone earth wiring.
Incomplete earthing may cause electric shocks or a fire.

• Be sure to install an earth leakage breaker.

Failure to do so may cause electric shocks and a fire.

• Disconnect the power supply before touching the electric

components.
If you touch the live part, you may get an electric shocks.

• Make sure that all wiring is secure, using the specified wir-

ings and ensuring that external forces do not act on the ter-
minal connections or wirings.
Incomplete connection or fixing may cause an overheat or a
fire.

• When wiring between the indoor and outdoor units, and wir-

ing the power supply, form the wirings orderly so that the con-
trol box cover can be securely fastened.
If the control box cover is not in place, overheat of the termi-
nals, electric shocks or a fire may be caused.

• If the supply cord is damaged, it must be replaced by the

manufacturer, a service agent or similarly qualified persons
in order to avoid a hazard.

This appliance is filled with R32.*

4PEN469440-1D.book Page 1 Tuesday, June 27, 2017 10:55 AM