background image

3

Read Before Operation

Safety Precautions

 

 CAUTION

•  Do not use the air conditioner for purposes other than those for which it is intended. Do not use the air conditioner for 

cooling precision instruments, food, plants, animals or works of art as this may adversely affect the performance, 

quality and/or longevity of the object concerned.

•  Do not expose plants or animals directly to the airflow from the unit as this may cause adverse effects.

•  Do not place appliances that produce naked flames in places exposed to the airflow from the unit as this may impair combustion of the burner.

•  Do not block the air inlets nor outlets. Impaired airflow may result in insufficient performance or trouble.

•  Do not sit on the outdoor unit, put things on the unit, or pull the unit. Doing so may cause accidents, such as falling or 

toppling down, thus resulting in injury, product malfunctioning, or product damage.

•  Do not place objects that are susceptible to moisture directly beneath the indoor or outdoor units. Under certain 

conditions, condensation on the main unit or refrigerant pipes, air filter dirt or drain blockage may cause dripping, 

resulting in fouling or failure of the object concerned.

•  After prolonged use, check the unit stand and its mounts for damage. If they are left in a damaged condition, the unit may fall and cause injury.

•  To avoid injury, do not touch the air inlet or aluminium fins of the indoor or outdoor units.

•  The appliance is not intended for use by unattended young children or infirm persons. Impairment of bodily functions 

and harm to health may result.

•  Children should be supervised to ensure that they do not play with the unit or its remote controller. Accidental 

operation by a child may result in impairment of bodily functions and harm health.

•  Avoid impacts to the indoor and outdoor units, or otherwise product damage may result.

•  Do not place flammable items, such as spray cans, within 1m of the air outlet. 

The spray cans may explode as a result of hot air from the indoor or outdoor units.

•  Be careful not to let pets urinate on the air conditioner. Urination on the air conditioner may result in electric shock or fire.

•  Do not wash the air conditioner with water, as this may result in electric shock or fire.

•  Do not place water containers (vases, etc.) above the unit, as this may result in electric shock or fire hazards if they should topple over.

•  Do not insert the batteries in the wrong polarity (+/-) orientation as this may result in short circuiting, fire, or battery leakage.

•  Do not remove the outdoor unit’s fan guard.  

The guard protects against the unit’s high speed fan, which may cause injury. 

•  Do not place heaters directly below the unit, as resulting heat can cause deformation. 
•  Do not leave the remote controller wherever there is a risk of wetting. 

If water gets into the remote controller there is a risk of electrical leakage and damage to electronic components.

•  To avoid oxygen depletion, ensure that the room is adequately ventilated if equipment such as a burner is used 

together with the air conditioner.

•  Before cleaning, be sure to stop unit operation and turn off the circuit breaker. Otherwise, an electric shock and injury may result.

•  Only connect the air conditioner to the specified power supply circuit. Power supplies other than the one specified may 

result in electric shock, overheating and fires.

•  Arrange the drain hose to ensure smooth drainage. Imperfect drainage may cause wetting of the building, furniture, etc.

•  Do not place objects in direct proximity of the outdoor unit and do not let leaves and other debris accumulate around 

the unit. Leaves are a hotbed for small animals which can enter the unit. Once inside the unit, such animals can cause 

malfunctions, smoke or fire if they come into contact with electrical parts.

•  Do not place objects around the indoor unit. 

Doing so may have an adverse influence on the performance, product quality, and life of the air conditioner.

•  This appliance is not intended to be used by persons with reduced physical, sensory or mental capabilities, or with 

lack of operation knowledge, unless they have been given supervision or instruction concerning the appliance use by 

person responsible for their safety. Keep out of children’s reach to ensure that they do not play with the appliance.

•  For care and cleaning, call service personnel.
•  Never touch the internal parts of the controller.  

Touching certain internal parts will cause electric shock and damage to the unit. Please consult your dealer about 
checking and adjustment of internal parts.

FFP001

This is an appliance that is not accessible to the general public.

Precautions relating to area surrounding the indoor and outdoor units

 

„

Be sure to follow the instructions below.

• The indoor unit is at least 1m away from any television or radio set (unit may cause interference with the picture or sound).
• Refrain from using the units in areas prone to high levels of oily smoke, such as a kitchen. 

Water leakage may result.

01_EN_3P472684-7.indd   3

6/7/2017   16:59:16

Summary of Contents for FFA25RV1A





































Reviews: