![background image](http://html1.mh-extra.com/html/daikin/ffa25rv1a/ffa25rv1a_operation-manual_2460409010.webp)
9
Care
Care and Cleaning
Cleaning the suction grille
1.
Open the suction grille.
• Push the 2 catches away from you and slowly open
the suction grille. (To close, perform the steps in
reverse.)
Catch
2.
Remove the suction grille.
• Open the suction grille until it is 45 degrees to the
ceiling and then lift it upward.
3.
Remove the air filter.
Page 8
4.
Clean the suction grille.
Wash with a soft bristle brush
and a neutral detergent or water,
and dry thoroughly.
•
When very dirty
Directly apply the type of detergent used for
cleaning ventilation fans or ovens, wait for about 10
minutes, and then rinse with water.
5.
Reattach the air filter.
Page 8
6.
Reattach the suction grille.
• Refer to STEP 2.
7.
Close the suction grille.
• Refer to STEP 1.
Prior to a long period of non-use
1.
Operate the FAN mode for
several hours to dry out the
inside.
• To start the operation, refer to the operation manual
for the remote controller.
2.
After operation stops, turn
off the circuit breaker for
the room air conditioner.
3.
Clean the air filter and
reattach it.
4.
To prevent battery leakage,
take out the batteries from
the remote controller.
(Only for the wireless
remote controller)
We recommend periodical
maintenance
• In certain operating conditions, the inside of the air
conditioner may get foul after several seasons of use,
resulting in poor performance. It is recommended to
have periodical maintenance by a qualified contractor.
• For qualified contractor maintenance, please contact the
dealer where you bought the air conditioner.
01_EN_3P472684-7.indd 9
6/7/2017 16:59:18
Summary of Contents for FFA25RV1A
