background image

NOTE 

• 

For the sake of explanation, all indications 

are shown on the display in 

Fig. 1

 contrary to 

actual running situations.

• 

Fig. 1-2

 shows the remote controller with the 

front cover opened.

• 

If the AIR FILTER CLEANING TIME 

INDICATOR LAMP lights up, clean the air fi lter 

as explained in the operation manual attached 

to the indoor unit.

• After cleaning and reinstalling the air fi lter, 

press the FILTER SIGN RESET BUTTON 

on the remote controller. The AIR FILTER 

CLEANING TIME INDICATOR LAMP on the 

receiver will go out.

• The DEFROST OPERATION LAMP will fl ash 

when the power is turned on. This is not a 

malfunction.

• 

Do not place the remote controller where 

subject to direct sunlight. The display of the 

remote controller will get discolored and may 

fail to display information.

[CAUTIONS]

Make sure to turn off the unit and 

disconnect the power supply circuit 

breaker when taking care of the air 

conditioner.

Unless the power supply is disconnected, 

it may cause electric shock and injuries.

4.  HANDLING FOR WIRELESS 

REMOTE CONTROLLER

[Precautions in handling remote controller]

Direct the transmitting part of the remote 

controller to the receiving part of the air 

conditioner.

If something blocks the transmitting and receiving 

path of the indoor unit and the remote controller 

as curtains, it will not operate.

2 short beeps 
from the receiver 
indicates that 
the transmission 
is properly done.

Types of receiving tone

The following receiving tones sound when remote 

controller signals are detected by the receiver.
2 SHORT BEEPS:

Signal from the remote controller was received 

successfully.

1 LONG BEEP:

(Error tone) The selected function is not 

supported on this indoor unit.

3 SHORT BEEPS:

(Error tone) Setting/change cannot be made 

using this remote controller as centralised control 

is in operation.

NOTE 

• 

After settings are changed or operation is 

turned ON/OFF, make sure that the receiving 

tone of the indoor unit makes a beeping sound.

The maximum transmitting distance is 7 to 9m.

This depends on the installation condition of the 

indoor unit.

Do not drop or get it wet.

It may be damaged.

Never press the button of the remote 

controller with a hard, pointed object.

The remote controller may be damaged.

English 

4

02_EN_3P477582-1.indd   4

6/15/2017   15:17:39

Summary of Contents for FFA25RV1A





































Reviews: