For example.
When the timer is
programmed to stop the
system after 3 hours and
start the air conditioner
after 4 hours, the air
conditioner will stop after
3 hours and then 1 hour
later the air conditioner
will start.
NOTE
•
After the timer is programmed, the display
shows the remaining time.
EMERGENCY OPERATION
When the remote controller does not work due
to battery failure or the absence thereof, use the
switch on the receiver of the indoor unit. When
the remote controller does not work, even if the
batteries are replaced, contact your local dealer.
[START]
1
Press the EMERGENCY OPERATION
SWITCH on the receiver.
•
The air conditioner operates in the previous
mode.
•
The air conditioner operates with the previously
set fan speed.
1 2
Location of this display varies by model. (Refer to
Fig. 2
on page [1])
[STOP]
2
Press the EMERGENCY OPERATION
SWITCH again.
PRECAUTIONS FOR 2 REMOTE
CONTROLLER CONTROL SYSTEM
This system provides 2 other control systems
beside individual control (1 remote controller
controls 1 indoor unit) system. Confi rm the
following if your system is of the following control
system type.
2 remote controller control system
2 remote controllers (wired and wireless)
control 1 indoor unit.
The air conditioner follows individual operation.
•
Cannot have 2 remote controller control system
with only wireless remote controllers. (It will be
a 2 remote controller control system having 1
wired and 1 wireless remote controllers.)
•
Under 2 remote controller control system,
wireless remote controller cannot control timer
operation.
•
When set the timer by the wired remote controller,
the TIMER INDICATOR LAMP (Green) of the
receiver of the indoor unit is not light up.
•
If the wired remote controller is used for
operation, the display on the wireless remote
controller does not change.
Indoor unit
Remote controller
NOTE
•
Contact your local dealer in case of changing
the combination or setting of 2 remote
controller control systems.
•
Please do not change the combination and
settings for the 2 remote controller control
systems by yourself, but be sure to ask your
local dealer.
English
10
02_EN_3P477582-1.indd 10
6/15/2017 15:17:42
Summary of Contents for FFA25RV1A
