![background image](http://html1.mh-extra.com/html/daikin/fdy-f-series/fdy-f-series_operation-manual_4700218008.webp)
8
AUTOMATIC HEATING / COOLING CHANGEOVER
(Heat Pump Models Only)
When the air conditioner is operated in this mode it will automatically switch between the
heating and cooling mode.
1.
Press the MODE SELECTION BUTTON (24) (if required) until the AUTO MODE
INDICATOR (7) is displayed.
When the AUTO MODE is selected either the COOL or HEAT MODE INDICATOR
will also be displayed along with the most recent temperature setting. (ie. if the last
adjustment you made was the set the cooling mode temperature to 23° then when
you select the AUTO MODE it will display AUTO COOLING at a temperature of 23°).
The air conditioner will then measure the room temperature and select the applicable
mode (ie. heating or cooling) based on the current and desired room temperature.
2.
Adjust the desired room temperature (if required) by momentarily pressing on the top
or bottom section of the TEMPERATURE SET BUTTON (21) until the desired
temperature is displayed. Each press of the button will increase or decrease the
desired temperature by 1 degree. The desired temperature may be set in the range
of 16 - 32 degrees.
3.
Press the ON / OFF BUTTON (1) to commence operation. The OPERATION
INDICATOR (2) will illuminate.
4.
Select the desired fan speed (if required) by pressing the FAN SPEED SELECTOR
BUTTON (23).
5.
To turn the air conditioner off simply press the ON / OFF BUTTON (1). The
OPERATION INDICATOR (2) will extinguish.
PROGRAM DRY MODE
When the air conditioner is operated in this mode the microprocessor will give priority to
reducing the humidity level rather than the room temperature. (Please note that there may
still be some reduction in room temperature depending on ambient conditions). This mode
is normally used in very humid environments where the conditions may still be
uncomfortable even though the room temperature is fairly low. The air conditioner will not
enter the dry mode if the room temperature is below 16°C.
1.
Press the MODE SELECTION BUTTON (24) (if required) until the DRY MODE
INDICATOR (8) is displayed.
2.
Press the ON / OFF BUTTON (1) to commence operation. The OPERATION
INDICATOR (2) will illuminate.
3.
To turn the air conditioner off simply press the ON / OFF BUTTON (1). The
OPERATION INDICATOR (2) will extinguish.
Please note that the SELECTED TEMPERATURE DISPLAY (13) and FAN SPEED
DISPLAY (14) will not appear during PROGRAM DRY operation.