background image

3

IMPORTANT SAFETY INSTRUCTIONS

  Never remove any fixed covers on the indoor or outdoor unit. Removal of the covers

may expose fast moving fan blades or electrical components operating at a hazardous
voltage. Contact with the blades or high voltage components may result in injury or
electric shock.

 

  Never insert any objects into the openings in the indoor or outdoor unit. This may

damage the product or result in injury to the person inserting the object.

 

  Do not expose the indoor unit or remote controller to rain or moisture. Water or other

fluids on the electrical components may result in fire or electric shock.

 

  Always replace any blown fuse with a fuse of the same specification. The use of the

wrong type fuse may allow the electrical wiring to overheat and catch on fire. If the
correct type fuse continues to blow contact your installer or electrician.

 

  Never operate the air conditioner without the return air filter(s) in place. Operating the

unit without the filter(s) will allow dust to enter the indoor unit and build up on the heat
exchanger coil and fan motor. This will cause a malfunction of the unit which will not be
covered by Warranty.

 

  This electrical appliance is not intended for use by young children. Young children

should be supervised to ensure that they do not play with the outdoor unit.

 
 
 

MAIN SWITCH

 

 

Ensure that your installer shows you the location of the main power switch for the air
conditioning system. This switch is normally located adjacent to the outdoor unit or in
the fuse box / switchboard.

 
 

The main switch must be turned on at least 6 hours before the air conditioner is
operated to warm up the compressor. Failure to do so may result in damage to the
compressor which will not be covered by warranty.

 
 

If the air conditioner is not going to be used for an extended period of time or you are
going away on holidays, the main switch should be turned off to prevent accidental
operation of the air conditioner. Remember that the main switch must be turned back
on at least 6 hours before operating the air conditioner.

Summary of Contents for FDY "F" Series













Reviews: