9
FAN MODE
When the air conditioner is operated in the FAN MODE only the indoor fan is energised.
The outdoor unit will not operate and therefore heating or cooling will not be provided. This
mode is useful for circulating the air within the building.
1.
Press the MODE SELECTION BUTTON (24) (if required) until the FAN MODE
INDICATOR (9) is displayed.
2.
Press the ON / OFF BUTTON (1) to commence operation. The OPERATION
INDICATOR (2) will illuminate.
3.
Select the desired fan speed (if required) by pressing the FAN SPEED SELECTOR
BUTTON (23).
4.
To turn the air conditioner off simply press the ON / OFF BUTTON (1). The
OPERATION INDICATOR (2) will extinguish.
Please note that the SELECTED TEMPERATURE DISPLAY (13) will not appear during
FAN MODE operation.
PROGRAM TIMER
The air conditioner can be programmed to automatically turn on or off in 1 hour
increments up to 72 hours in advance. It may also be programmed to turn on for a
determined time then off again or vice versa provided that the last operation (ie. switch on
or off) is within 72 hours.
PROGRAMMING THE STOP TIME
1.
Press the TIMER MODE SELECT BUTTON (17) once. The PROGRAM STOP TIME
INDICATOR (11) will flash.
2.
Select the desired STOP TIME by momentarily pressing on the top or bottom section
of the PROGRAM TIME BUTTON (20) until the desired elapsed time is displayed.
Each press of the button will increase or decrease the elapsed time by 1 hour.
3.
Once the desired STOP TIME is displayed press the PROGRAM TIMER ON/OFF
BUTTON (18). The PROGRAM STOP TIME INDICATOR (11) will stop flashing and
remain displayed.
4.
Operate the air conditioner in the desired mode as described above. The PROGRAM
STOP TIME INDICATOR (11) will count down towards zero. When zero is reached
the air conditioner will stop operating.
PROGRAMMING THE START TIME
1.
Press the TIMER MODE SELECT BUTTON (17) two times (or only once if a stop
time has been set). The PROGRAM START TIME INDICATOR (12) will flash.
2.
Select the desired START TIME by momentarily pressing on the top or bottom
section of the PROGRAM TIME BUTTON (20) until the desired elapsed time is
displayed. Each press of the button will increase or decrease the elapsed time by 1
hour.
