background image

10

 

3.

Once the desired START TIME is displayed press the PROGRAM TIMER ON/OFF
BUTTON (18). The PROGRAM START TIME INDICATOR (12) will stop flashing and
remain displayed.

 

4.

Set the air conditioner in the desired mode as described above but do not press the
ON/OFF BUTTON (1). The PROGRAM START TIME INDICATOR (12) will count
down towards zero. When zero is reached the air conditioner will start operating.

 
 

PROGRAMMING THE START AND STOP TIME

 
 

It is possible to set both the start and stop time so that the air conditioner either starts after
a predetermined time and then stops after a further predetermined time or stops after a
predetermined time and then starts again after a further predetermined time.

 

This is achieved by setting both the on and off time as described above. For example if
you require the air conditioner to stop in 3 hours time and then start up again 6 hours later
you would program a stop time of 3 hours and a start time of 9 hours (ie. 3 + 6 hours).

 
 

CANCELLING THE START OR STOP TIME

 
 

If you change your mind and do not want the air conditioner to automatically start or stop
simply press the PROGRAM TIMER ON/OFF BUTTON (18) and the START or STOP
TIME INDICATOR will extinguish.

 

 

ADVANCED FEATURES

 
 

FILTER CLEAN INDICATOR

 
 

The indoor microprocessor monitors the accumulated running time of the unit and after a
preset number of running hours displays the FILTER CLEAN INDICATOR (15) on the
remote controller. This indicator is a reminder to check and clean (if required) the return
air filter(s).

 

After you have inspected and cleaned the filter(s) press the FILTER CLEAN RESET
BUTTON (22) to extinguish the display and reset the accumulated time counter.

 

As the type of filter is selected by your installer it is not possible for us to describe the
method of removing and cleaning the filter(s). Please consult your installer regarding the
maintenance of the air filter(s).

 
 

DEFROST FUNCTION

 
 

During heating at low outside air temperatures it is possible for frost to build up on the
outdoor unit heat exchanger. This build up of frost will restrict the airflow through the heat
exchanger and therefore the performance of the air conditioner will gradually be reduced.
As the outdoor unit microprocessor is constantly monitoring system performance and
ambient temperature it will recognise that frost is building up on the heat exchanger and
activate the defrost mode.

 

When the unit enters the defrost mode both the indoor and outdoor fans will stop and the
DEFROST INDICATOR (16) will be displayed on the remote control. The unit will remain
in the defrost mode for around 4 to 8 minutes (10 min. max.) during which time the heat
exchanger will warm up to defrost itself.

Summary of Contents for FDY "F" Series













Reviews: