Daikin FDMQ-R Series Manual Download Page 270

Page: 270 / 484

268

FTX-N/U, FVXS-N, FDMQ-R Series EDUS091558E

C: 3P379751-5D

TIMER Operation

To use OFF TIMER operation

• Check that the clock is correct.

If not, set the clock to the present time.

Page 10

Press

�

“

” is displayed on the LCD.

“

” blinks.

• “ ” and day of the week disappear from the LCD.

Press

until the time setting reaches the point

you like�

• Each pressing of either button increases or decreases the time setting by 10 minutes.

Holding down either button changes the time setting rapidly.

Press

again�

• “

” and setting time are displayed on the LCD.

• The TIMER lamp lights orange.

Display

To cancel OFF TIMER operation

Press

�

• “

” and setting time disappear from the LCD.

• “ ” and day of the week are displayed on the LCD.
• The TIMER lamp goes off.

To combine ON TIMER and OFF TIMER operation

• A sample setting for combining the 2 timers is shown below.

(Example)

Present time: 23:00 (The unit operating)
OFF TIMER at 0:00
ON TIMER at 14:00

Combined

NOTE

NIGHT SET mode

• When the OFF TIMER is set, the air conditioner automatically adjusts the temperature setting (0.9°F (0.5°C) up in COOL, 3.6°F (2.0°C) down in

HEAT) to prevent excessive cooling (heating) during sleeping hours.

01_EN_3P379751-5D.indd 18

11/13/2018 2:17:14 PM

Summary of Contents for FDMQ-R Series




































































































































































































































































































































































































































































































Search results

Summary of Contents for FDMQ-R Series

Reviews:

Related manuals for FDMQ-R Series

Brands by name

Popular brands

Daikin FDMQ-R Series, Manual

Search results

Summary of Contents for FDMQ-R Series

Reviews:

Related manuals for FDMQ-R Series

Brands by name

Popular brands