Daikin FDMQ-R Series Manual Download Page 131

Page: 131 / 484

FTX-N/U, FVXS-N, FDMQ-R Series EDUS091558E

129

3P243521-7L

Safety Considerations

The original instructions are written in English. All other languages are translations of the original

instructions.

All phases of the



eld-installation, including, but not limited to, electrical, piping, safety, etc. must be in

accordance with manufacturer’s instructions and must comply with national, state, provincial and local

codes.

Read these

SAFETY CONSIDERATIONS

carefully before installing the remote controller.

After completing the installation, ensure that the remote controller operates properly during the startup

operation.

Train the customer to operate and maintain the remote controller. Inform customers that they should

store this Installation Manual with the Operation Manual for future reference.

Always use a licensed installer or contractor to install this product. Improper installation can result in

electrical shock,



re, or explosion.

Meanings of

WARNING, CAUTION

, and

NOTE

Symbols.

WARNING

Indicates a potentially hazardous situation which, if not avoided, could

result in death or serious injury.

CAUTION

Indicates a potentially hazardous situation which, if not avoided, may

result in minor or moderate injury.

It may also be used to alert against unsafe practices.

NOTE

Indicates situations that may result in equipment or property-damage

accidents only.

WARNING

Only quali



ed personnel must carry out the installation work.

Consult your Daikin dealer regarding relocation and reinstallation of the remote controller.

Improper installation work may result in electric shocks or



re.

Electrical work must be performed in accordance with relevant local and national regulations and

with instructions in this installation manual.

Improper installation may cause electrical shocks or



re.

Use only speci



ed accessories and parts for installation work.

Failure to use speci



ed parts may result in electric shocks,



re, or the unit falling.

Do not disassemble, reconstruct, or repair.

Electric shock or



re may occur.

Make sure that all wiring is secured, that speci



ed wires are used, and that no external forces act on

the terminal connections or wires.

Improper connections or installation may result in



re.

Before touching electrical parts, con



rm the power-off to the unit.

01_EN_3P243521-7L.indd 2

11/27/2014 11:21:41 AM

12.5 <BRC1E73> Wired Remote Controller

Summary of Contents for FDMQ-R Series




































































































































































































































































































































































































































































































Search results

Summary of Contents for FDMQ-R Series

Reviews:

Related manuals for FDMQ-R Series

Brands by name

Popular brands

Daikin FDMQ-R Series, Manual

Search results

Summary of Contents for FDMQ-R Series

Reviews:

Related manuals for FDMQ-R Series

Brands by name

Popular brands