Daikin FDMQ-R Series Manual Download Page 247

Page: 247 / 484

FTX-N/U, FVXS-N, FDMQ-R Series EDUS091558E

245

3P572320-1

Care

Titanium apatite deodorizing filter

Open the front panel and

pull out the air filters.

Page 28,29

Take off the titanium apatite

deodorizing filters.

•

Hold the recessed parts of the frame and unhook
the 4 claws.

Claw

Clean or replace the

titanium apatite deodorizing

filters.

[Cleaning]

3-1 Vacuum dust, and soak in lukewarm

water or water for about 10 to 15

minutes if very dirty�

•

Do not remove the filter from the frame when
washing with water.

3-2 After washing, shake off remaining

water and let them dry in the shade�

•

Do not wring out the filter to remove water from it.

[Replacement]

Remove the filter from the filter

frame and attach a new one�

•

Do not throw away the filter frame. Reuse the filter
frame when replacing the titanium apatite
deodorizing filter.

•

When attaching the filter, check that the filter is
properly set in the tabs.

Tabs

•

Dispose of the old filter as non-flammable waste.

Set the titanium apatite

deodorizing filters as they

were�

Reattach the filters.

Page 29

Close the front panel slowly�

Page 28

NOTE

•

Operation with dirty filters:

– cannot deodorize the air,

– cannot clean the air,

– results in poor heating or cooling,

– may cause odor.

•

Dispose of old filters as non-flammable waste.

•

To order a titanium apatite deodorizing filter, contact the
dealer where you bought the air conditioner.

Item

Titanium apatite deodorizing filter
(without frame) 1 set

Part No�

KAF970A46

01_EN_3P572320-1.indd 30

2019/06/10 17:01:17

Summary of Contents for FDMQ-R Series




































































































































































































































































































































































































































































































Search results

Summary of Contents for FDMQ-R Series

Reviews:

Related manuals for FDMQ-R Series

Brands by name

Popular brands

Daikin FDMQ-R Series, Manual

Search results

Summary of Contents for FDMQ-R Series

Reviews:

Related manuals for FDMQ-R Series

Brands by name

Popular brands