Daikin FDMQ-R Series Manual Download Page 405

Page: 405 / 484

FTX-N/U, FVXS-N, FDMQ-R Series EDUS091558E

403

3P124623-1E

OPERATION

Individual screen, all screen,

zone screen (Fig. 3)

This controller can perform operations in the individual

screen, all screen, or zone screen.

•

Individual screen The individual screen is used

when performing group opera-

tions.

•

All screen

The all screen is used when per-

forming operations for all units at

once.

•

Zone screen

The zone screen is used when

performing zone operations.

Select the screen by pressing the

“ALL/INDIVIDUAL” button.

Every time the “ALL/INDIVIDUAL” button is

pressed, the selection scrolls through INDIVIDUAL

→

ALL

→

ZONE.

If nothing is done in the all or zone screens for one

minute, it automatically goes to the individual

screen.

“

” DISPLAY (OPERATION

CODE AND UNIT NUMBER DIS-

PLAY)

The method of operation (remote controller

prohibited, central operation priority after-press

operation priority, etc.) is displayed by the

corresponding code.

This displays the numbers of any indoor units

which have stopped due to an error.

“

” “

” DISPLAY (TIME TO

CLEAN AIR CLEANER ELEMENT/

TIME TO CLEAN AIR FILTER)

Displayed to notify the user it is time to clean the

air filter or air cleaner element of the group

displayed.

VENTILATION MODE BUTTON

This is pressed to switch the ventilation mode of

the total enthalpy heat exchanger.

ALL/INDIVIDUAL BUTTON

Pressing this button scrolls through the “all

screen”, “zone screen”, and “individual screen”.

ARROW KEY BUTTON

This button is pressed when calling an individual

indoor unit or a zone.

ON/OFF BUTTON

Starts and stops ALL, ZONE, and INDIVIDUAL

units.

TEMPERATURE ADJUSTMENT

BUTTON (ZONE NUMBER BUTTON)

This button is pressed when setting the

temperature. Select the zone number if any

zones have been registered.

FAN DIRECTION ADJUSTMENT

BUTTON

This button is pressed when setting the fan

direction to “fixed” or “swing”.

OPERATION MODE SELECTOR

BUTTON

This sets the operation mode. The dry setting

cannot be done.

TIME NO. BUTTON

Selects time No. (Use in conjunction with the

schedule timer only).

31 CONTROL MODE BUTTON

Selects control mode.

FILTER SIGN RESET BUTTON

This button is pressed to erase the “clean filter”

display after cleaning or replacement.

CODE

UNIT No.

33 SET BUTTON

Sets control mode and time No.

FAN STRENGTH ADJUSTMENT

BUTTON

Pressing this button scrolls through “weak”,

“strong”, and “fast”.

ZONE SETTING BUTTON

Zone registration mode can be turned on and off

by pressing the start and stop buttons simulta-

neously for at least four seconds.

INSPECTION/TEST RUN BUTTON

(FOR SERVICE)

Pressing this button scrolls through “inspection”,

“test run”, and “system display”.

This button is not normally used.

VENTILATION STRENGTH

ADJUSTMENT BUTTON

This button is pressed to switch the ventilation

strength (“fresh up”) of the total enthalpy heat

exchanger.

(Notes)

1. Please note that all the displays in the figure

appear for explanation purposes or when the

cover is open.

2. If the unit is used in conjunction with other optional

central controllers, the OPERATION LAMP of the

unit that is not under operation control may light

up and go out a few minutes behind schedule.

This shows that the signal is being exchanged,

and does not indicate any failure.

Summary of Contents for FDMQ-R Series




































































































































































































































































































































































































































































































Search results

Summary of Contents for FDMQ-R Series

Reviews:

Related manuals for FDMQ-R Series

Brands by name

Popular brands

Daikin FDMQ-R Series, Manual

Search results

Summary of Contents for FDMQ-R Series

Reviews:

Related manuals for FDMQ-R Series

Brands by name

Popular brands