5.12 Blow Function Setting
Blow function: After the unit is turned off, water in evaporator of indoor unit will be automatically evaporated to
avoid mildew.
In cooling and dry mode, press
Function
button till the unit enters dry function,
BLOW
blinking,
and then press
Enter/Cancel
button to turn on this function.
In blow mode, press
Function
button till the unit enters blow function and then press
Enter/
Cancel
button to cancel this function.
Blow function setting is shown in Fig.5.12
Turn on the unit, without
turning on blow function
Press “Function” button
into blow function
Press “Enter/Cancel” button
to turn on blow function
Press “Enter/Cancel” button
to turn off blow function
Press “Function” button
into blow function
Fig.5.12 Blow function setting
Note:
1. After setting
b
low function, turn off the unit by pressing
On/Off
button or remote controller, indoor fan will
run at low fan speed for 10 min. (
BLOW
shows). Meanwhile, if
b
low function is canceled
,
indoor fan will be
turned off directly.
2. There is no BLOW function in fan or heating mode.
English
19
