5.9 Turbo Function Setting
Turbo function: The unit at high fan speed can realize quick cooling or heating so that room temperature can
quickly approach setting temperature.
In cooling or heating mode, press
Function
button till the unit enters turbo function and then
press
Enter/Cancel
button to turn on turbo function.
During turbo function, press
Function
button till the unit enters turbo function and then press
Enter/Cancel
button to cancel turbo function.
Turbo function setting is shown in Fig.5.9:
Turn on the unit, without
turning on urbo function
Press “Function” button
into turbo function
Press “Enter/Cancel” button
to turn on turbo function
Press “Enter/Cancel” button
to turn off turbo function
Press “Function” button
into turbo function
Note:
Fig.5.9 Turbo Function Setting
1. Turbo function will be turned off after power failure and then recovery. In dry, fan and auto mode, turbo
function can not be set and T
mark won’t be displayed.
2. Turbo function will be automatically canceled after setting of quiet function.
5.10 Save Function Setting
Energy Saving Function: Energy saving result that the air conditioner runs in smaller temperature range is
realized by setting lower limited value of setting temperature in cooling or dry mode
and upper limited value in heating mode.
Energy Saving Setting for Cooling
Under on-state and in cooling or dry mode of the unit, press
Function
button into energy saving function,
SAVE
blinking. Press or button to adjust lower limited value of setting temperature in cooling mode.
After that press
Enter/Cancel
button to turn on energy saving function for cooling.
Energy Saving Setting for Heating
Under on state and in heating mode of the unit, press
Function
button into energy saving function,
SAVE
blinking. Press
Mode
button into energy saving function for heating and then press or button to adjust
upper limited value of setting temperature in heating mode. After that, press
Enter/Cancel
button to turn on
energy saving function for heating.
-
URBO
t
English
16
