Daikin FCA71AV16, Installation Manual

Page: 62 / 67

B) Washing with water
When the air filter is very dirty,
use soft brush and neutral
detergent.
Remove water and dry in the shade.
NOTE -!Di
• Do not wash the air filter with water of 50°C or higher.
It may cause discoloration and deformation.
• When drying the filter, do not heat it with fire.
It may cause burning.
• Do not use such as gasoline, benzine, thinner,
polishing powder and liquid insecticide sold in
the market.
It may cause discoloration and deformation.
4. Fix the air filter.
Refer to item No. 2.
5. Shut the suction grille.
Slowly push up the suction grille, and then securely hook
it onto the decoration panel while pushing the two knobs.
NOTE -!Di
• The strings may be caught when the suction grille is
closed. Before closing the suction grille, ensure that
the strings are not getting out from the side of the
suction grille.
o�
x
�
Yes No
· ·
�
String
� 11 �
String is getting
Suction grille
out from the
suction grille.
6. Turn off the indication "Time to clean filter"
displayed on the remote controller after turning
on the power.
• For details, refer to the operation manual attached
to the remote controller. (The indication can be
turned off whether in operation or at stop.)
HOW TO CLEAN AIR OUTLET, OUTSIDE
PANEL, AND REMOTE CONTROLLER
• Wipe them with a dry soft cloth.
• When the stain cannot be wiped off, dip the cloth in
the neutral detergent diluted with water and twist the
cloth. After wiping off stain with this cloth, wipe them
with dry cloth.
NOTE 7::"li
• Do not use such as gasoline, benzine, thinner,
polishing powder and liquid insecticide sold in
the market.
It may cause discoloration and deformation.
• Do not wash the filter with warm water of 50°C or
higher. It may cause discoloration and deformation.
6
1
HOW TO CLEAN THE SUCTION GRILLE
1. Open the suction grille.
Push it downward slowly while pressing the buttons
provided on two spots. (Follow the same procedure
for closing.)
Fig.3
2. Remove the strings of the suction grille.
Remove the two strings from the holding parts on the
panel main body to which the strings are attached.
3. Detach the suction grille.
Open the suction grille 45 degrees and lift it upward.
Fig.4
4. Detach the air filter.
Refer to "HOW TO CLEAN THE AIR FILTER".
(Refer to Fig. 2)
5. Clean the suction grille.
Wash with a soft bristle brush and
neutral detergent or water, and dry
throughly.
• When very grimy
Directly apply the type of detergent
used for cleaning ventilation fans or ovens,
wait 1 O minutes, and then rinse with water.
NOTE -!Di
• Do not wash the suction grille with water of 50°C
or higher.
It may cause discoloration and deformation.
• When drying the suction grille, do not heat it with
fire. It may cause burning.
• Do not use such as gasoline, benzine, thinner,
polishing powder and liquid insecticide sold in
the market.
It may cause discoloration and deformation.
I