D-EOMWC00803-26_01EN - 22/39
4.2.13.5 BACNET IP
When the software option "BACNet IP" is activated and the controller is restarted, the communication protocol settings
page can be accessed via the path:
Main
Menu→Commission Unit→SW BACNet IP
The values that can be set are the same as those found on the BACNet MSTP option page with the relative driver, and
depend on the specific system where the unit is installed.
The port for LAN connection to be used for BACNet IP communication is the T-IP Ethernet port, the same one used for
remote control of the controller on the PC.
