D-EOMWC00803-26_01EN - 21/39
4.2.13.4 BACNET MSTP
When the software option "BACNet MSTP" is activated and the controller is restarted, the communication protocol settings
page can be accessed via the path:
Main
Menu→Commission Unit→SW BACNet MSTP
The values that can be set are the same as those found on the BACNet MSTP option page with the relative driver, and
depend on the specific system where the unit is installed.
To establish the connection, the RS485 port to use is the one on the T14 terminal of the MT4
controller.
