Daikin DCC601A51 Installation Manual Download Page 10

Page: 10 / 12

8 Disposal

Installation manual

DCC601A51

intelligent Tablet Controller

4P414342-1D – 2020.12

Once all wiring has been completed and double-checked, turn
on the power supply.

CAUTION

The power supply is

ONLY

guaranteed when the "DC OK"

LED on the WAGO PSU

and

the "CPU ALIVE" LEDs on

both

the CPU module and the I/O module are blinking.

If one or more of the above LEDs are NOT lighting up,
check for faulty wiring.

INFORMATION

A  new  CPU  module  does  NOT  come  with  application
software  installed.  Therefore,  the  "ALARM"  LED  will  be  lit
red.  This  is  as  expected,  see  the  table  under

"6.4.1 CPU

module"

[

6]. Application software will be installed during

the commissioning phase. For more information about
commissioning, see the installer reference guide.

7.2.4

Connecting the LAN cable

For all wiring requirements see

"7.2.1 Wiring requirements"

[

7].

Do NOT connect the LAN cable until you start commissioning the
intelligent Tablet Controller. Otherwise, a network address conflict
may occur. For more information about commissioning the intelligent
Tablet Controller setup, see the installer reference guide.

7.3

About the installation of the Daikin-
supplied router

For information on the installation, see the manual provided with the
Daikin-supplied router. For information on when to use the Daikin-
supplied router, see

"5.4 Additional components in the intelligent

Tablet Controller solution"

[

4].

The following table gives an overview of the most relevant
information.

Requirement

Information

Default WiFi name (SSID)

ASUS

Default WiFi password (access
key)

To be found on the sticker at the
back of the router.

Router configuration URL

Use one of the following:

▪ http://192.168.1.1

▪ http://router.asus.com

Router configuration password

Not set. You will set this when
you start the router’s "Quick
internet setup (Quick internet
setup)" feature.

Disposal

DANGER: RISK OF EXPLOSION

There is a risk of explosion if the internal battery is
replaced by an incorrect type.

Replace the battery according to the instruction in To
replace the data backup battery

▪ Both intelligent Tablet Controller modules are marked with the

following symbol:

This  means  that  electrical  and  electronic  products  may  not  be
mixed  with  unsorted  household  waste.  Do  NOT  try  to  dismantle
the  system  yourself:  the  dismantling  of  the  system,  treatment  of

the refrigerant, of oil and of other parts must be done by an
authorized installer and must comply with applicable legislation.

Units must be treated at a specialized treatment facility for reuse,
recycling and recovery. By ensuring this product is disposed of
correctly, you will help to prevent potential negative consequences
for the environment and human health. For more information,
contact your installer or local authority.

▪ The CPU module contains a replaceable battery, marked with the

following symbol:

This  means  that  the  battery  may  not  be  mixed  with  unsorted
household  waste.  If  a  chemical  symbol  is  printed  beneath  the
symbol,  this  chemical  symbol  means  that  the  battery  contains  a
heavy metal above a certain concentration.

Possible chemical symbols are: Pb: lead (>0.004%).

Waste batteries must be treated at a specialized treatment facility
for reuse. By ensuring waste batteries are disposed of correctly,
you will help to prevent potential negative consequences for the
environment and human health.

Copyright and trademarks

SDHC Logo is a trademark of SD-3DC, LLC.

Technical data

▪ A

subset

of the latest technical data is available on the regional

Daikin website (publicly accessible).

▪ The

full set

of latest technical data is available on the Daikin

Business Portal (authentication required).

10.1