![background image](http://html1.mh-extra.com/html/daikin/comfort-flex-cliv-series/comfort-flex-cliv-series_installation-operation-and-maintenance-manual_4699236040.webp)
iom-cliv-eng
www.comfort-flex.com
40
Alarms
The default password to enter the communication configuration
is:
1234
to enter the password simply turn the dial to the right to
increase the value or turn the dial to the left to decrease the value
(for more details on this procedure refer to the example navigation
section within the controller menu); once this step is done and the
PIN is entered correctly, a screen like the one shown below will
appear and turn the dial until the Device Management option is
selected.
After selecting this option press the dial to access the
communications configuration submenu and select the TCP/
IP Setup option and then press the dial to access the submenu
option.
After completing the previous step, select the Ethernet 1 menu
selection option.
Once the above menu is selected, the network address of the
device can be accessed. There are different options to which
the device has to be adapted depending on the required network
installation needs or remote monitoring requirements either from
the device itself or a third party device such as PC’S, Tablets, or
mobile devices.
The following is a brief explanation of the options offered by this
menu for a quick configuration of visualization through the device.
The following screen shows that selecting the DHCP option in
ON mode means that the device can connect to a router that
can provide an automatic IP address, depending on whether this
router has an internet connection the device acquires the IP that
the router or internet connection provides.
Selecting the DHCP option in OFF mode means that the device
can be configured with a manual address which means that the
address can be assigned by a user or network administrator so
that the device is visible within the connection.