iom-cliv-eng
www.comfort-flex.com
52
Controller Use
Parameter number 20:
Switch_Min_Setpoint_Cool_Value:
This parameter allows changing the minimum system cooling
setpoint.
Parameter number 21:
Switch_Max_Setpoint_Cool_Value:
This parameter allows changing the maximum system cooling
setpoint.
Parmeter number 22:
Switch_Setpoint_Cool_Value:
This parameter allows changing the system cooling setpoint.
Parameter number 23:
Demand_Percent:
This parameter shows the current workload capacity of the
compressor in its default is handled from zero to 100 in case
the system is with a 2-stage compressor this will calculate the
percentage at which the first and second compressor should turn
on their due stages.
Parameter number 24:
Number_Stages:
This parameter allows you to change the configuration as the
system will work depending on the number of compressors in this
case Cliv equipment has a two-stage compressor for which the
parameter is with a value of 2.
Parameter number 25:
Ton_Stage2:
The purpose of this parameter is to modify the time at which the
compressor will turn on whether 1 or 2 stages are configured.
