![background image](http://html1.mh-extra.com/html/daikin/comfort-flex-cliv-series/comfort-flex-cliv-series_installation-operation-and-maintenance-manual_4699236047.webp)
iom-cliv-eng
www.comfort-flex.com
47
Controller Use
Once the folder icon is selected, press the dial and you will be
able to access the content of that icon and the content of the
menus inside it.
To access more configurations, simply repeat the above, so that
you can navigate between icons or menus.
Example of parameter modification.
In order to modify the parameters, simply press the dial on the
pointer of the parameter to be modified. A small example is shown
below.
As shown, this parameter can be modified in question; before
modifying the parameter you must verify that the pointer or black
background that is in the description of the parameter must be
selected, once the parameter is selected all you have to do is
press the dial.
Once the dial is pressed, the following image will appear in that
parameter where the <10 S> symbols will change to >10 S< and
indicate that the parameter is ready to be modified.
After this step simply turn the dial either clockwise or
counterclockwise increasing or decreasing the desired value,
then press the dial again and you will see that the <10 S> symbols
as shown in the previous image will return to their normal state,
from here the value has already been modified.
ACCESSING FOLDER ICON MENUS
In this section we will take the menus contained in the folder icon
and at the same time explain how to access these icons in order
to modify the equipment’s operating parameters.
To access these parameters, first select the folder icon and once
this icon is selected, press the dial to access the parameters it
contains.
Next, it will ask for the access pin to be able to enter to modify
the parameters. To enter the password, simply turn the dial to
the right or left, observing that the numerical value increases or
decreases, where the default password is:
1234.
After pressing the dial the Datapoints menu can be accessed as
shown in the following image and as can be seen, the Datapoint
menu is shaded black which means that the dial is currently
pointing to that menu.
By moving the dial to the right or to the left the pointer can be
moved either to the top of the menu or to the menu to be selected
as shown in the following screen; in this case in order to access the
parameters of time or shutdown configuration for the equipment it
is necessary to move to the modbus menu.
Once this menu has been selected by the pointer, press the dial
and you will be able to access the menu that will guide you to the
parameters.