background image

Wireless Remote Controller and Wireless 
Receiver Kit

Operation  and  

Installation Manual

CONTENTS

 

„

Wireless Remote Controller

For operation

ILLUSTRATIONS .......................................................... [1]
PRIOR TO USE ............................................................ [2]

  1. SAFETY PRECAUTIONS ....................................... 1
  2. WHAT TO DO BEFORE OPERATION .................... 4
  3. NAMES AND FUNCTIONS OF THE  

OPERATING SECTION  
(Refer to Fig. 1-1, 1-2, 1-3, 2 on page [1]) ............... 4

  4. HANDLING FOR WIRELESS REMOTE  

CONTROLLER ........................................................ 5

  5. OPERATION RANGE .............................................. 6
  6. INSTALLATION SITE............................................... 6
  7. OPERATION PROCEDURE .................................... 6
  8. OPERATION CHARACTERISTICS ....................... 13
  9. OPTIMUM OPERATION........................................ 13
  10. MAINTENANCE  

(FOR SERVICE PERSONNEL) ............................ 14

  11. NOT MALFUNCTION OF THE AIR  

CONDITIONER ..................................................... 14

  12. HOW TO DIAGNOSE TROUBLE SPOTS ............. 15
  13. HOW TO CHECK THE INITIAL SET VALUE ......... 16

For installation

  1. SAFETY PRECAUTIONS ..................................... 17
  2. BEFORE INSTALLATION ...................................... 17
  3. REMOTE CONTROLLER INSTALLATION ............ 18
  4. INITIAL SETTING ................................................. 19

 

„

Wireless Receiver Kit

For installation

  1. REMOTE CONTROLLER INITIAL SETTING ........ 19
  2. RECEIVER INSTALLATION .................................. 20
  3. FIELD SETTING ................................................... 24
  4. TEST OPERATION ............................................... 25

 

„

Wireless Remote Controller

For operation

1.  SAFETY PRECAUTIONS

To gain full advantage of the air conditioner’s functions 
and to avoid malfunction due to mishandling, please 
read this operation manual carefully before use. 
This product comes under the term “appliances 
not access ble to the general public”.

This appliance is intended to be used by 

expert or trained users in shops, in light 

industry and on farms, or for commercial 

use by lay persons.
This appliance can be used by children 

aged from 8 years and above and persons 

with reduced physical, sensory or mental 

capabilities or lack of experience and 

knowledge if they have been given 

supervision or instruction concerning 

use of the appliance in a safe way and 

understand the hazards involved. 

Children shall not play with the appliance. 

Cleaning and user maintenance shall only 

be done by persons described in manual.

The appliance is not intended for use by 

unattended young children or persons who 

are incompetent to operate air conditioners.

It may result in injury or electric shocks.

• 

This manual classifies the precautions into 

WARNINGS and CAUTIONS. Be sure to 

follow all the precautions below: They are 

all important for ensuring safety.

 WARNING ......  

Indicates a potentially 
hazardous situation which, 
if not avoided, could result 
in death or serious injury.

 CAUTION ......  

Indicates a potentially 
hazardous situation which, 
if not avoided, may result in 
minor or moderate injury. 
It may also be used to alert 
against unsafe practices.

• 

After reading, keep this manual in a convenient 

place so that you can refer to it whenever 

necessary. If the equipment is transferred to a 

new user, be sure also to hand over the manual.

 WARNING

When the air conditioner is malfunctioning 

(giving off a burning odor, etc.), turn off the 

power to the air conditioner and contact 

your local dealer. 

Continued operation under such circumstances 

may result in a failure, electric shocks or a fire. 

Summary of Contents for BRC7M530W

































Reviews: