FTXS20/25/35/42/50G2V1B
SiENBE04-808_A
73
System Configuration
2.7
ECONO Operation
NOTE
ECONO operation is a function which enables efficient operation by
limiting the maximum power consumption value.
This function is useful for cases in which attention should be paid to
ensure a circuit breaker will not trip when the product runs alongside
other appliances.
To start ECONO operation
1. Press “ECONO button”.
•
“
” is displayed on the LCD..
To cancel ECONO operation
2. Press “ECONO button” again.
•
“
” disappears from the LCD.
•
This diagram is a representation for
illustrative purposes only.
*
The maximum running current and
power consumption of the air
conditioner in ECONO mode vary with
the connecting outdoor unit.
Notes on ECONO operation
•
ECONO Operation can only be set when the unit is running. Pressing the OFF button causes the setting to be canceled,
and the “
” disappears from the LCD.
•
ECONO operation is a function which enables efficient operation by limiting the power consumption of the outdoor unit
(operating frequency).
•
ECONO operation functions in AUTO, COOL, DRY and HEAT modes.
•
POWERFUL and ECONO operation cannot be used at the same time.
Priority is given to the function of whichever button is pressed last.
•
Power consumption may not drop even if ECONO operation is used of the level of power consumption is already low.
1, 2
Time
Running current and
power consumption
Normal
operation
ECONO
Mode
Maximum during
normal operation
Maximum during
ECONO Mode
From start up until set
temperature is reached
SiENBE04-808_A.pdf 85
21/02/2011 13:19:58
