2 Components
Service manual
76
EBLQ+EDLQ011~W1 + EBLQ+EDLQ011~0W1
+ EK(2)CB EKMB9W1
Daikin Altherma – Monobloc
ESIE18-04 – 2019.02
a
Nut
b
Propeller fan
blade
assembly
3
Pull and remove the propeller fan blade assembly from the DC
fan motor assembly.
4
To install the propeller fan blade assembly, see
.
To remove the DC fan motor assembly
1
Remove the propeller fan blade assembly from the DC fan
motor assembly, see
"2.18.2 Repair procedures" on page 75
2
Remove the front plate of the outdoor unit, see
.
3
Disconnect the DC fan motor connector.
4
Cut the tie straps.
5
Detach the DC fan motor harness from the cable clamps.
6
Guide the DC fan motor harness through the opening between
the partition plate and the stop valve mounting plate.
7
Remove the 4 screws that fix the DC fan motor assembly.
8
Remove the DC fan motor assembly from the unit.
9
To install the DC fan motor assembly, see
.
To install the DC fan motor assembly
1
Install the DC fan motor assembly in the correct location.
2
Install and tighten the 4 screws.
3
Route the DC fan motor harness through the cable clamps.
4
Route the DC fan motor harness through the opening between
the partition plate and the stop valve mounting plate.
5
Connect the DC fan motor connector.
6
Install new tie straps.
7
Install the front plate of the outdoor unit, see
.
8
Install the propeller fan blade assembly, see
.
To install the propeller fan blade assembly
1
Install the propeller fan blade assembly on the DC fan motor
assembly.
CAUTION
Do NOT install a damaged propeller fan blade assembly.
2
Install and tighten the nut to fix the propeller fan blade
assembly.
a
b
5
a
Nut
b
Propeller fan
blade
assembly
3
Install the air discharge grill and fix it by tightening the nuts.
a
b
a
a
Nut
b
Air discharge grill
Is the problem solved?
Action
Yes
No further actions required.
No
Return to
outdoor unit fan motor and
continue with the next procedure.