2 Components
Service manual
68
EBLQ+EDLQ011~W1 + EBLQ+EDLQ011~0W1
+ EK(2)CB EKMB9W1
Daikin Altherma – Monobloc
ESIE18-04 – 2019.02
b
k
e
f
d
c
g
i
k
g
l
a
a
h
i
i
j
a
Latch
b
Wire terminal mounting plate
c
Wire terminal LB
d
Wire terminal NB
e
Faston connector with orange wire (+)
f
Faston connector with grey wire (-)
g
Tie strap
h
Red and blue wiring
i
Cable guide
j
Compressor wiring
k
Connector X205A
l
Connector X9A
3
Turn over the wire terminal mounting plate.
4
Disconnect the wire terminals LB and NB from the main PCB.
5
Disconnect the 2 Faston connectors.
6
Cut the tie 2 straps.
7
Remove the red and blue wiring from the cable guides.
8
Remove the compressor wiring from the cable guides.
9
Disconnect the connectors X205A and X9A.
10
Insert 2 flathead screwdrivers in the slots and unlatch the upper
and lower assemblies.
b
a
c
a
a
Slot
b
Upper assembly
c
Lower assembly
11
Slightly lift the upper assembly and slide it to the right to release
the 3 hooks.