Daikin Altherma 3 R ECH2O, Installer'S Reference Manual

Page: 311 / 316

12/13
Breadcrumb Field code Setting name Range, step
Default value
Date Value
Field settings table
Installer setting at variance with
default value
9.I [D-09] R/W
0: No
1: 0,1 pulse/kWh
2: 1 pulse/kWh
3: 10 pulse/kWh
4: 100 pulse/kWh
5: 1000 pulse/kWh
6: 100 pulse/kWh (PV meter)
7: 1000 pulse/kWh (PV meter)
8 1 pulse/m³ (gas monitoring)
9 10 pulse/m³ (gas monitoring)
10 100 pulse/m³ (gas monitoring)
9.I [D-0A] 0
9.I [D-0B]
2
9.I [D-0C] 0
9.I [D-0D] 0
9.I [D-0E] 0
9.I [E-00] R/O 0~5
0: LT split
9.I [E-01] R/O 1
9.I [E-02] R/W (*3)
R/O (*4) 0: Reversible (*3)
1: Heating only (*4)
9.I [E-03] R/O
(*6,*7,*8)
R/W (*9)
0: no heater (*9)
1: ext heater
2: 3V (*6)
3: 6V (*7)
4: 9W (*8)
9.I [E-04] R/O 0: No
1: Yes
9.I [E-05] R/O 0: No
1: Yes
9.I [E-06] 1
9.I [E-07] R/W 0~8
0 OSO tank 150/180
1 FS with BUH
2 FS with BSH
3 OSO tank 200/250/300
4 Rotex without BSH (HYB)
5 Rotex with BSH
6 Third party tank for HYB
7 Third party tank, coil >= 1,05m²
8 Third party tank, coil >= 1,8m²
9.I [E-08] R/W 0: disabled
1: Enabled
9.I [E-09] 1
9.I [E-0A] R/O 30 (*1)
50 (*2)
9.I [E-0B] R/W 0: Not installed
1: -
2: Bizone kit installed
9.I [E-0C] R/W
0: Without hydraulic separator / no
direct pump
1: With hydraulic separator / no direct
pump
2: With hydraulic separator / with direct
pump
9.I [E-0D] R/W 0: No
1: Yes
9.I [E-0E] 0
9.I [F-00] R/W 0: Disabled
1: Enabled
9.I [F-01] R/W 10~35°C, step: 1°C
20°C
9.I [F-02]
3
9.I [F-03] 5
9.I [F-04]
0
9.I [F-05] 0
9.I [F-06] R/W 0: Disabled
1: Enabled
9.I [F-07] R/W 0: Enabled
1: Disabled
9.I [F-08] R/W
0: Disabled
1: Enabled
9.I [F-09] R/W 0: Disabled
1: Enabled
9.I [F-0A] 0
9.I [F-0B] R/W 0: No
1: Yes
9.I [F-0C] R/W 0: No
1: Yes
9.I [F-0D] R/W 0: Continuous
1: Sample
2: Request
9.I [F-0E] R/W 10~35 kW, step: 1kW
20 kW
Bizone kit settings
9.P.1 [E-0B] R/W 0: Not installed
1: -
2: Bizone kit installed
9.P.2 [E-0C] R/W
0: Without hydraulic separator / no
direct pump
1: With hydraulic separator / no direct
pump
2: With hydraulic separator / with direct
pump
9.P.3 [7-0A] R/W
20~95%, step 5%
95%
What is the pump operation mode?
Above which outdoor temperature is cooling allowed?
--
--
Power saving function for outdoor unit.
--
Close shut-off valve during cooling?
Add zone pump fixed PWM
Tank heating support_max
Tank volume
Can the system prepare domestic hot water?
Is an external kWh meter used for power measurement, kWh meter used for smart
grid or a gas meter for hybrid unit?
--
--
--
Continuous heating defrost enable
Is a bizone kit installed?
Pump operation during flow abnormality.
--
Close shut-off valve during thermo OFF?
Bizone kit installed
Is the system filled with glycol ?
Enable Tank Boiler?
Efficiency calculation
What bizone system type is installed?
Bizone system type
--
What kind of DHW tank is installed?
Is the power saving function available on the outdoor unit?
Which type of unit is installed?
--
--
--
Pump operation allowed outside range.
--
--
What is the indoor unit software type?
What is the number of backup heater steps?
Which type of compressor is installed?
4P670988-1 - 2021.09
(*1) 300 Tank_(*2) 500 Tank_
(*3) *X*_(*4) *H*_(*5) *B*_
(*6) EKECBUA3V_(*7) EKECBUA6V_(*8) EKECBUA9W_(*9) BUH less_
(*10) 11P_(*11) 16P