SQLC-220-086
7
2. The name and function of each part
This switch resets various alarms.
And, in the maximum and the minimum measurement
display, it is used as a switch that resets the
maximum and the minimum value.
In setting mode, it is used as a switch to which
a setting item is shifted.
Bar graph display
The measurement value of the main
monitor is indicated by the analog.
(Bar graph display of the measurement
value of sub-monitor is also possible.)
Digital display
Measurement monitor can watch
4 elements at the same time.
･Main monitor
･Sub-monitor (Right)
･Sub-monitor (Center)
･Sub-monitor (Left)
SET
The switch from which integrated
value of the amount of electric
power is switched to normal
display (5 digits of integer) and
expansion indication (integer 2 digits
and 3 decimal places) variously.
If it is not operated for 10 minutes after
a display change, it will usually return
to a display. Also used as switch which
changes to setting mode.
If it continues pushing 3 seconds or more,
it will change to setting mode.
In setting mode, it is used as a switch that
determines a set point.
RESET/
SHIFT
Scale markings
Scale markings is automatically set in
a measurement range.
Unit display
Unit display is automatically set in a
measurement range.
Upper limit (or lower limit) setting index
An upper limit (or lower limit) set point
is displayed.
Multiplying factor display
Multiplying factor is displayed at the
time of an Wh and varh display.
MODE
The switch to which general measurement display (usually) and the
harmonic measurement (voltage and current) display are changed.
In set mode, it is used as a switch that changes a setting item.
DISPLAY
This is a switch which changes the
phase (line) display of current
(voltage).
If it is not operated for 10 minutes after
a display change, it returns to the original
phase (line) display. In setting mode, it
is used as a switch that terminates setting
mode.
The switch to which measurement displays
element of main monitor is changed.
If it is not operated for 10 minutes after a display
change, it returns to the original measurement display
factor. In set mode, it is used as a switch that
changes a setting value.
MAX/MIN
The switch to which general measurement display (usually)
and the maximum minimum measurement display are changed.
＋
－