Daiichi Electronics SQLC-110L, Instruction Manual, Page: 34 / 74

SQLC-220-086
33
(8) Setting of analog output.
Each parenthesized number shows a setting number and this number is displayed on the setting screen.
Items Setting and operation procedures Page
Set the analog
output sensitivity
(％ of an output to
an input) of
current.
(225A)
Press SET and RESET/SHIFT together for longer than 3 seconds
Press MODE
(211) (221A)
Press RESET/SHIFT
Press RESET/SHIFT Press RESET/SHIFT
(222A) (223A) (224A)
Press RESET/SHIFT
Select a output sensitivity by ＋ and － Press SET
(225A)
Selected output sensitivity is entered
Press DISPLAY Returns to display mode.
52,53
Set the analog
output sensitivity
(％ of an output to
an input) of active
power.
(226A)
Press SET and RESET/SHIFT together for longer than 3 seconds
Press MODE
(211) (221A)
Press RESET/SHIFT
Press RESET/SHIFT Press RESET/SHIFT
(222A) (223A) (224A)
Press RESET/SHIFT
Press RESET/SHIFT
(225A) (226A)
Select a output sensitivity by ＋ and －
Press SET
Selected output sensitivity is entered
Press DISPLAY Returns to display mode.
52,53
Set the analog
output sensitivity
(％ of an output to
an input) of
reactive power.
(227A)
Press SET and RESET/SHIFT together for longer than 3 seconds
Press MODE
(211) (221A)
Press RESET/SHIFT
Press RESET/SHIFT Press RESET/SHIFT
(222A) (223A) (224A)
Press RESET/SHIFT
Press RESET/SHIFT Press RESET/SHIFT
(225A) (226A) (227A)
Select a output sensitivity by ＋ and －
Press SET
Selected output sensitivity is entered
Press DISPLAY Returns to display mode.
52,53
Set the output cut
function at the
case in minute input
(0.5％ or less).
(At the case of
analog output)
(228A)
Press SET and RESET/SHIFT together for longer than 3 seconds
Press MODE
(211) (221A)
Press RESET/SHIFT
Press RESET/SHIFT Press RESET/SHIFT
(222A) (223A) (224A)
Press RESET/SHIFT
Press RESET/SHIFT Press RESET/SHIFT
(225A) (226A) (227A)
Press RESET/SHIFT
Select a low input cut ON/OFF by ＋ and － Press SET
(228A)
Selected action is entered
Press DISPLAY Returns to display mode.
52,53