Daiichi Electronics SQLC-110L, Instruction Manual, Page: 31 / 74

SQLC-220-086
30
Items Setting and operation procedures Page
Set the factor of
alarm output 1.
(121AL)
Press SET for longer than 3 seconds
Press MODE
(111) (121AL)
Select an output factor by ＋ and －
Press SET Selected factor is entered
Press DISPLAY
Returns to display mode.
41
Set the factor of
alarm output 2.
(125AL)
Press SET for longer than 3 seconds
Press MODE Press RESET/SHIFT
(111) (121AL) (122AL)
Press RESET/SHIFT
Press RESET/SHIFT Press RESET/SHIFT
(123AL) (124AL) (125AL)
Select an factor by ＋ and －
Press SET Selected factor is entered
Press DISPLAY
Returns to display mode.
41
Set the external
operation input 1
function.
(251)
Press SET and RESET/SHIFT together for longer than 3 seconds
Press MODE
(211) (221A)
Press MODE
Press MODE Select an function by ＋ and － Press SET
(241P) (251)
Selected function is entered
Press DISPLAY Returns to display mode.
55
Set the external
operation input 2
function.
(252)
Press SET and RESET/SHIFT together for longer than 3 seconds
Press MODE
(211) (221A)
Press MODE
Press MODE Press RESET/SHIFT Select an function by ＋ and －
(241P) (251) (252)
Press SET Selected function is entered Press DISPLAY Returns to display
mode.
55
Set the time
interval of demand
current.
(132)
Press SET for longer than 3 seconds
Press MODE Press MODE
(111) (121AL) (131H)
Press RESET/SHIFT
Select an time interval by ＋ and － Press SET
(132)
Selected time interval is entered Press DISPLAY Returns to display mode.
42
Set the time
interval of demand
active power.
(134)
Press SET for longer than 3 seconds
Press MODE Press MODE
(111) (121AL) (131H)
Press RESET/SHIFT
Press RESET/SHIFT Press RESET/SHIFT
(132) (133H) (134)
Select an time interval by ＋ and － Press SET
Selected time interval is entered
Press DISPLAY Returns to display mode.
42
Set the operation
method of demand
active power.
(135)
Press SET for longer than 3 seconds
Press MODE Press MODE
(111) (121AL) (131H)
Press RESET/SHIFT
Press RESET/SHIFT Press RESET/SHIFT
(132) (133H) (134)
Press RESET/SHIFT Select an operation method by ＋ and － Press SET
(135)
Selected operation method is entered
Press DISPLAY Returns to display mode.
42
Set the phase wire of
input circuit.
(311)
2VT･3CT product is 3-phase 3-wire (3φ3W) fixation.
57
Set the input
voltage.
(312)
Press SET and DISPLAY together for longer than 3 seconds Press RESET/SHIFT
(311) (312)
Select an input voltage by ＋ and －
Press SET
Selected input voltage is entered
Press DISPLAY Returns to display mode.
57